Product ID:ACRY-NAMEL ACRYLIC G, 5000
MSDS Date:03/01/1991
FSC:8010
NIIN:00N079162
MSDS Number: CGZBG

EVR-GARD COATINGS CO

16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

0.1 @ 68F.

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

185 G/L.

RTECS: 9999999VO

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:MAY CAUSE HEADACHE AND
NAUSEA, DIZZINESS. SKIN CONTACT/ABSORPTION:PRIMARILY AN IRRITANT.
REDNESS OR RASH. EYE CONTACT:PRIMARILY AN IRRITANT.
INGESTION:NAUSEA, DIZZINESS, HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT W/MATERIAL MAY
CAUSE DERMATITIS.

First Aid:INHAL:REMOVE PATIENT TO FRESH AIR. EYES:FLUSH W/CLEAN WATER
FOR AT LEAST 15 MINUTES. SKIN:REMOVE SATURATED CLOTHING & WASH
W/SOAPY WATER THOROUGHLY. INGEST:INDUCE VOMITING W/1-OZ OF SYRUP OF
IPECAC FO LLOWED IN 5 MINUTES W/GLASS OF WATER. CALL MD.

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT SUPPORT
COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ABSORB SPILL W/ANY ABSORBENT MATERIAL -
SAWDUST, SAND, CLAYS, ETC & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
USE & STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING. DO NOT TAKE INTERNALLY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:THE USE OF NIOSH APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOWS & DOORS OR USE OTHER MEANS TO INSURE
FRESH AIR ENTRY DURING APPLICATION & DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HNDLG & APPLICATION
OF THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL TIMES.
Protective Gloves:BUNA N GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE & COLORS; SLIGHT AMMONIA SMELL.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS & MATERIALS THAT REACT W/WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55-GAL METAL DRUMS & DISPOSE IN APPROVED
DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.